Safety Training, Equipment, Supplies & Rentals

Any job site or workplace that works consistently with chemicals is required to have a Hazard Communication Program to help educate workers on the various aspects of these dangerous chemicals. Workers need to be able to understand and identify various chemicals throughout the workplace and know how to work with them safely. Not only does this eliminate accidents and gives workers a greater sense of confidence and peace of mind while working, but this education is also required by OSHA and is also known as Worker’s Right to Know. OSHA’s most commonly cited violation is the failure to meet these requirements and the reason a lot of workplaces don’t enforce them is because they simply feel that explaining these chemicals too their workers is just too complicated and complex to fully understand. This is a grave mistake and could lead to employees practicing unsafe methods when using various chemicals while working. This is why Hazard Communication Training is extremely important in educating workers on the dangers of the chemicals they are working with.

We cannot understate how important Hazard Communication Training is. Workers must be educated and trained in it and will need to know the main components of the program. One of the key aspects of a Hazard Communication Program is the Material Safety Data Sheet (MSDS). These sheets are designed to inform workers of everything they need to know about particular chemicals. By reading the MSDS, workers should be able to determine:

  • Any and all health hazards relating to any chemical they are working with or will be exposed to.
  • The flammability of the product that they are working with. They will also be able to determine the temperature the product will ignite at.
  • How reactive the particular chemical is and how it will react with other chemicals and agents. This will let them know if they could be dealing with a potential explosion or similar behavior when working with specific chemicals.
  • The Personal Protective Equipment (PPE) they will need to protect themselves from the chemicals and products they will be working with.

hazard communication training

Along with the above information, workers need to also be able to know, answer, and remember the following:

  • Where the MSDs are kept for the chemicals they will be working with and exposed to.
  • What kind of threats, hazards, and dangers they will experience should they improperly use any chemicals.
  • The steps and emergency procedures to follow should there be a spill or accident.
  • How to correctly and fully inspect their PPE to ensure that it is working and functioning properly.

One of the most convenient ways to review with your workers the threats and hazards posed by chemicals in the workplace is through the MSDS Information Review form. This form can communicate vital information relating to chemical use in the workplace and is considered more user friendly than the full MSDS. The full MSDS should be used when more specific information and data is needed and should always be available.

As we all probably remember from our high school or college days, chemistry is a complicated subject that requires conscious effort to remember and know the details and properties of various different chemicals. Some workplaces use dozens of chemicals while others use hundreds. Learning and understanding all of these chemicals will take time, that’s why it is imperative that workers take Hazard Communication Training to better help themselves learn the material. However, unlike high school or college where not knowing the material simply earned you a bad grade, not knowing the material while working in the factory, warehouse, or job site will earn you a trip to the hospital, or worse, the morgue. Know your Hazard Communications so you can create a much safer environment for you and your coworkers.

Excavations can be a normal part of everyday operations at a lot of job sites across the country, but this does not discount the fact that excavations can still be extremely dangerous. If you do not know what you’re doing around an excavation, or you are not aware of your surroundings and the conditions related to the excavation, you are simply asking for trouble and could experience an incident that could serious injure or even kill you. There have been several occurrences where workers were working in a trench only for the walls to collapse and trap them inside. Luckily, some were able to be dug out and they were able to escape without too much harm or injury, others were not so lucky and paid the price with their lives. By knowing your excavation safety, you can help prevent incidents such as these and perform successful, and safe, excavations.

Soil can become extremely heavy, so it is important to not dig your trenches and excavations too deep. The deeper the trench is, the bigger a threat it becomes to cave in and trap someone inside. Soil can be fickle and cave in without any prior notice, so it is important that every single excavation you perform is done properly and correctly. Keep in mind that each and every trench is its own animal. Variables such as soil moisture, soil type, depth, configuration, proximity to already existing structures, and locations of nearby spoil piles can all affect how a particular trench is going to behave. When working on excavation and trenching, remember the following.

  • Follow the directions of your competent person closely and carefully. It is their job to make sure that the excavation goes smoothly and safely. They are also responsible for making sure that the excavation is properly protected so that you and your coworkers can go about your tasks safely.
  • If the trench ends up being deeper than 5 feet, then it MUST be protected from cave-ins. The only exception to this rule is if the trench is made completely of stable rock. By properly sloping back the sides of the cut or benching the excavation, adequate protection can be provided. Reinforcement can also be provided through installing shoring or implementing trenching boxes. If boxes or shoring are used, make sure that the top of the box is extended AT LEAST 18 inches above the trench. If the trench ends up being deeper than 6 feet, then you will have to use fall protection around the perimeter to protect workers who will be working on the surface.
  • Any and all spoil piles must be at least 2 feet in distance from the edge of the trench. The edge of the trench is where the slough of the pile ends. If you position spoil piles any closer than this, then the soil will create too much pressure on the walls of the trench and the chances of a wall failure greatly increase.
  • Ladders must be positioned within the trench so that workers are never further than 25 feet from a ladder.

excavation safety

If you are one of the workers that will actually be entering the trench, you will want to inspect the methods being used to protect the excavation. This includes the condition of the shoring equipment and how stable the ladders are that are positioned around the trench. Before ever climbing down the ladder and entering the trench, make sure that the spoil pile is positioned an adequate distance from the edge of the trench (remember 2 feet) along with any other equipment that is near the trench. You want to be completely comfortable will all your surroundings and safety precautions before ever setting foot in the trench. If you follow the above guidelines and notify your supervisor of anything that requires prior attention BEFORE entering the excavation, you should be able to enter the trench with peace of mind and confidence that you can complete the job efficiently, and most importantly, safely. Excavation safety is important! Don’t neglect it!

1 2 3 4